Trace Heating With A Thermostat

At Aptiva we can install self-regulating trace heating cable for frost protection to pipework exposed to low temperatures and for maintaining desired service temperatures for pipework systems. The typical uses for a system like this are for sprinkler systems that run outside and will ensure that the system can run at 100% even in freezing conditions. Hot water services – buildings like hotels and hospitals can benefit from our systems which enable them to maintain an instant supply of hot water to 60 degrees centigrade. It will also protect agaisnt legionella.

These systems can be used to maintain or raise the temperature of pipes and vessels using heat tracing cables. The system takes the form of an electrical heating element that is run in phyical contact along the length of the pipe. These systems can be very helpful for pipes that need to transport substances at a certain temperature. There’s no need to worry about the trace heating cable using too much energy as it won’t be constantly on. With the thermostat you will be able to set the temperature of when you want the system to turn on and start heating up and even set the temperature to turn off once it has heated back up to a desired value.

Trace Heating With A Thermostat

More About Trace Heating With A Thermostat

Once the system is fully installed and ready to go thermal insulation will be applied to the network to reduce the amount of heat and energy that can escape the pipe and will also help to save you money on your energy bill. At Aptiva this isn’t the only service we can provide. We also can provide you with Valve Jackets, Passive Fire Stopping and Thermal Insulation.

if you are interested in our services please make sure you get in contact with us. Take a look at our gallery to see examples of work we have completed for our customers.