Heat Tracing System
At Aptiva we install self-regulating cable for frost protection to pipework exposed to low temperatures and for maintaining desired service temperatures. The typical uses for this system can be for sprinkler pipework systems this can ensure 100% operation of the facility even in freezing conditions. Hot Water Services is another use of this system as hotels and hospitals can benefit from our systems which enable them to maintain an instant supply of hot water to 60 degrees centigrade. It will also protect against legionella. This system can raise the temperature of the pipes and vessels using heat tracing cables. What this does is take the form of an electrical element run in physical contact along the length of a pipe. Every pipe or vessel is subject to heat loss when its temperature is greater than ambient temperature.
With all of our systems we will apply thermal insulation to the network to protect and enable the system to operate effectively. The thermal insulation reduces the rate of heat loss but will not eliminate it. But with the heat tracing system it will keep the pipe or vessle at the correct temperature by sensing when the temperature drops below a set value then the system will heat up the pipework up until another set value where the system will turn off. We install all our systems with Digitech Thermostats enabling complete control over the system.
Get In Contact With Heat Tracing System
Aptiva limited were established in 1986 and have continued to expand and to develop our range of services to the private, commercial and industrial sectors.
If you are in need of a heat tracing system please make sure you get in contact with us and we will be able to tell you more about the system.
Take a look at our gallery to see an example of our services we provide.
See our other services, Thermal Insulation, Valve Jackets and Passive Fire Stopping.